City – Bhubaneswar, India


As the capital of the state of Odisha (formerly Orissa), Bhubaneswar, replaced Cuttack as the state capital in 1949, and is one of the first planned cities in India. That said, Bhubaneswar and Cuttack are referred to as the twin cities of Odisha, with a combined population of over 2.5 million. As a tier-2 city, it is emerging as a center for education and information technology in the state.

With increasing population, construction activity and transport, the pollution control board in Orissa has reported that levels of suspended particulate matter are will above the standard even in the summer months. As there is no proper system to manage waste in landfills as yet in the city, pollution from burning waste is another source that needs to be addressed.

To assess Bhubaneswar’s air quality, we selected 30km x 50km of urban airshed, which includes both Cuttack and Bhubaneswar. This domain is further segregated into 1km grids, to study the spatial variations in the emission and the pollution loads.

 

Monitoring Emissions Meteorology Dispersion References


Monitoring

We present below a summary of the ambient monitoring data available under the National Ambient Monitoring Program (NAMP), operated and maintained by the Central Pollution Control Board (CPCB, New Delhi, India). In Bhubaneswar, there are no continuous air monitoring stations (CAMS). Instead, there are 5 manual stations reporting data on PM10, SO2, and NO2.

 

 


Satellite Data Derived Surface PM2.5 Concentrations:

The results of satellite data derived concentrations are useful for evaluating annual trends in pollution levels and are not a proxy for on-ground monitoring networks. This data is estimated using satellite feeds and global chemical transport models. Satellites are not measuring one location all the time, instead, a combination of satellites provide a cache of measurements that are interpreted using global chemical transport models (GEOS-Chem) to represent the vertical mix of pollution and estimate ground-based concentrations with the help of previous ground-based measurements. The global transport models rely on gridded emission estimates for multiple sectors to establish a relationship with satellite observations over multiple years. These databases were also used to study the global burden of disease, which estimated air pollution as the top 10 causes of premature mortality and morbidity in India. A summary of PM2.5 concentrations from this exercise, for the city of Bhubaneswar is presented below. The global PM2.5 files are available for download and further analysis @ Dalhousie University.


Emissions

We compiled an emissions inventory for the Bhubaneswar and Cuttack region for the following pollutants – sulfur dioxide (SO2), nitrogen oxides (NOx), carbon monoxide (CO), non-methane volatile organic compounds (NMVOCs), carbon dioxide (CO2); and particulate matter (PM) in four bins (a) coarse PM with size fraction between 2.5 and 10 μm (b) fine PM with size fraction less than 2.5 μm (c) black carbon (BC) and (d) organic carbon (OC), for year 2015 and projected to 2030.

We customized the SIM-air family of tools to fit the base information collated from the central pollution control board, state pollution control board, census bureau, national sample survey office, ministry of road transport and highways, annual survey of industries, central electrical authority, ministry of heavy industries, municipal waste management, geographical information systems, meteorological department, and publications from academic and non-governmental institutions.

This emissions inventory is based on the available local activity and fuel consumption estimates for the selected urban airshed (presented in the grid above) and does not include natural emission sources (like dust storms, lightning) and seasonal open (agricultural and forest) fires; which can only be included in a regional scale simulation. These emission sources are accounted in the concentration calculation as an external (also known as boundary or long-range) contribution to the city’s air quality.

The emissions inventory was then spatially segregated at a 0.01° grid resolution in longitude and latitude (equivalent of 1 km) to create a spatial map of emissions for each pollutant (PM2.5, PM10, SO2, NOx, CO and VOCs). The gridded PM2.5 emissions and the total (shares by sector) emissions are presented below.

Gridded PM2.5 Emissions (2015)

Emissions Inventory

Total PM2.5 Emissions by Sector 2015-2030

Emissions Inventory Emissions Inventory Emissions Inventory

Total Estimated Emissions by Sector for 2015 (units – mil.tons/year for CO2 and tons/year for the rest)

 PM2.5PM10BCOCNOxCOVOCSO2CO2
11,250 22,400 2,700 3,600 22,250 129,050 27,350 1,350 2.28
TRAN 3,000 3,150 1,250 1,000 6,200 64,300 19,700 2501.46
RESI 2,450 2,500 500 1,250 650 36,450 4,450 4500.35
INDU 1,000 1,100 150150 8,250 5,700 4001000.06
DUST 2,000 12,750 -------
WAST950 1,000 50600- 4,650 950-0.01
DGST650700400100 6,200 1,650 150500.28
BRIC 1,200 1,200 350500950 16,300 1,700 5000.12

TRAN = transport emissions from road, rail, aviation, and shipping (for coastal cities); RESI = residential emissions from cooking, heating, and lighting activities; INDU = industrial emissions from small, medium, and heavy industries (including power generation); DUST = dust emissions from road re-suspension and construction activities; WAST = open waste burning emissions; DGST = diesel generator set emissions; BRIC = brick kiln emissions (not included in the industrial emissions)


Meteorology

We processed the NCEP Reanalysis global meteorological fields from 2010 to 2016 through the 3D-WRF meteorological model. A summary of the data for year 2015, averaged for Bhubaneswar is presented below. Download the processed data which includes information on year, month, day, hour, precipitation (mm/hour), mixing height (m), temperature (C), wind speed (m/sec), and wind direction (degrees) – key parameters which determine the intensity of dispersion of emissions.






Windrose Functions for 2013-2016

Windrose Functions Windrose Functions Windrose Functions Windrose Functions


Dispersion Modeling

We calculated the ambient PM2.5 concentrations and the source contributions, using gridded emissions inventory, 3D meteorological data (from WRF), and the CAMx regional chemical transport model. The model simulates concentrations at 0.01° grid resolution and sector contributions to the urban area, which include contributions from primary emissions, secondary sources via chemical reactions, and long range transport via boundary conditions (represented as “outside” in the pie graph below).

PM2.5 Source Contributions Ambient PM2.5 Concentrations PM2.5 Source Contributions


Findings and Recommendations

  • Modeled urban average ambient PM2.5 concentration is 47.4 ± 9.4 μg/m3 – is above the national standard (40) and more than 4 times the WHO guideline (10)
  • The city requires at least 22 continuous air monitoring stations to statistically, spatially, and temporally, represent the mix of sources and range of pollution in the city (current status – 5 manual and 0 continuous)
  • The modeled source contributions highlight transport (including on road dust), domestic cooking and heating, and open waste burning as the key air pollution sources in the urban areas
  • The city has an estimated 32% of the ambient annual PM2.5 pollution (in 2015) originating outside the urban airshed, which suggests that some regional interventions could reduce the pollution loads. This contribution is mostly stemming from coal-fired power plants and large (metal and non-metal processing) industries
  • The city needs to aggressively promote public and non-motorized transport as part of the city’s urban development plan, along with the improvement of the road infrastructure to reduce on-road dust re-suspension
  • By 2030, the vehicle exhaust emissions are expected to remain constant, if and only if, Bharat 6 fuel standards are introduced nationally in 2020, as recommended by the Auto Fuel Policy
  • By 2030, the share of emissions from residential cooking and lighting is expected to decrease with a greater share of LPG, residential electrification, and increasing urbanization. However, since the availability of biomass and coal in the region is high, a fair share of its use is expected to continue, unless an aggressive program is in place a 100% technology shift to cleaner options like LPG and electricity
  • About 150 brick kilns are in this urban airshed and are fueled mostly by coal and agri-waste. These are located to the east of the city and between Cuttack and Bhubaneswar. These seasonal kilns can benefit from a technology upgrade from the current fixed chimney to (for example) zig-zag, in order to improve their overall energy efficiency
  • Open waste burning is dispersed across the city and requires stricter regulations for addressing the issue, as the city generates ever more garbage, with limited capacity to sort and dispose of it.

Back to the APnA page.

All the analysis and results are sole responsibility of the authors @ UrbanEmissions.Info. Please send you comments and questions to simair@urbanemissions.info